ZINGA METAL AND COMPANY, TVP, TOV

The given enterprise has: Messages: 7 (new 7)
Are you representative of the company?
Do you want to edit information?

Ukraine

Address:

49051 m. Dnipro, prosp. Slobozhansʹkyy, 40a, of. 47

Post address:

49051 m. Dnipro, prosp. Slobozhansʹkyy, 40a, of. 47

Phone number:

+38 (056) 7855151
+38 (097) 0095151
+38 (099) 7855151

Fax:

+38 (056) 3736676

Contact person :

Borislavskii Sergii Yuriiovich

Head:

Borislavskii Sergii Yuriiovich - director

Bookkeeper:

Kalinkina Irina Volodimirivna

Bookkeeper`s phone:

+38 (056) 7717936

Working hours

Mon: 09:00 - 18:00

Tue: 09:00 - 18:00

Wed: 09:00 - 18:00

Th: 09:00 - 18:00

Fri: 09:00 - 18:00

Sat: 09:00 - 18:00


Bank

Registration number: 33856332

Bank: Filial ZAO OTP-Bank v g. Dnepropetrovske

BIC code: 307071

Transactional account: 26005001307854



Information :

Number of employees: 7

Year of foundation: 2005

Send email

About the company

<b>Zinga Metall & Co.</b> is the official importer of the materials of the international Association <b>ZingaMetall Europe</b> (www.zingametall.ua), as well as the manufacturer of its own materials under the trademark <b>ZingaMetall</b>.

Our company constantly develops, improves old and creates new technologies in the field of cold galvanizing, decorative metallization, thermal insulation and waterproofing. In the creation of its know-how, it cooperates with the laboratories of the scientific research institute, on new projects and developments, with factory and industrial laboratories, with construction, repair and installation companies.

Our company and the network of our agencies can provide technical support, advice, author supervision, as well as perform a number of works on galvanizing metal and waterproofing structures ..

<b>What are our advantages?</b>

Application of our methodology for cold galvanizing of steel structures gives an economic effect in the form of savings of 30-40% of costs per square meter, in comparison with traditional hot galvanizing, and our methodology does not require special premises and size restrictions, the method is environmentally friendly, the materials used certified by the Ministry of Health of Ukraine.

Materials for galvanizing are one-component, have the effect of soft rubber, they have excellent adhesion to previously galvanized surfaces (they restore the old zinc layer during application) and can be applied at a humidity of up to 98% in the temperature range from -15 S to + 40 S.

The use of our materials, such as warm paint and warm plaster, in the thermal insulation system allows you to save up to 50% compared to the cost of traditional methods of thermal insulation. These materials are easy to apply, durable, not destroyed under the influence of high temperatures or ultraviolet radiation, environmentally safe, certified by the Ministry of Health.

<b>Using our penetrating gyro-isolation - AquaStop</b>
Penetrating waterproofing is designed for the treatment of concrete structures in order to prevent the capillary rising of water on the pores of concrete.

The depth of penetration of such materials is from 5 to 25 cm. This means that when processing a monolithic concrete wall on both sides a protective barrier will be formed at the entire depth of the structure.
Materials for penetrating waterproofing are among the most effective <b>waterproofing</b> and can be used in conjunction with other water protection products.
As a rule, the means of penetrating waterproofing are used to protect cellars, ground floors, the first floors of residential buildings, concrete tanks, tanks and other structures in the immediate vicinity of the water-bearing layer.

<b>The main advantages of penetrating waterproofing:</b>
No need to dig a foundation;
Possibility of application to wet concrete;
Penetration of the material deep into the concrete structure;
Self-healing of the material: when it breaks up with water, it forms new crystals due to the renewed reaction of wet concrete and the constituents of the sealant;
High frost resistance and strength of the material;
Service life equal to the service life of the most concrete structure;
Resistance to all types of mechanical impact;
Easy application without the use of special equipment.

Considering your possible interest in galvanizing the embedded parts in the concrete products you make, and also improving the quality of the concrete used in your concrete products, due to our waterproofing additives in concrete, we look forward to personal acquaintance when we meet with you at your enterprise.

<b>Zinga</b> protects the metal from corrosion better than any other zinc coating.


<b>Beware of fakes!</b> Exclusive brands ZinGalvanic, ZingaMetall, Liquid Zinc can only be bought from us.

Goods

Zinga offers:


--- ZINC MATERIALS ZINGAMETALL ---


FOR COLD GALLERY

* ZINGA
forms a thin-film zinc coating on the steel surface, which effectively protects ferrous metals from corrosion. It combines the advantages of hot-dip galvanizing and paint coatings, while lacking a number of disadvantages inherent in such coatings, and also has unique advantages over them. The Zinga coating provides both active (cathodic) protection, like zinc coatings with metallization, and passive (barrier, film) protection, like paintwork materials. The material is intended for galvanizing steel in a cold way (patent number BE 1008926 dated 01.10.1996, Belgium).
Appearance of the coating is gray, matt.
Adhesion - 1 point.
Surface preparation - Sa 2,5 (ISO 12944) - abrasive blasting preparation, roughness Ra 12,5 mkm, dedusting, degreasing.
Consumption: 0.25 kg / m2 (&#948; = 40 &#956;m)

* ZINGALVANIC grade VA
this material differs from Zinga in that the composition contains zinc particles with a fraction of about 3 &#956;m, with a shape close to oval, and also contains zinc particles with the shape of flakes. Due to this combination, zinc particles create the so-called MIO effected system effect, which complicates the path of the aggressive medium to the substrate. The product, galvanized ZinGalvanic looks like a product, hot-dip galvanized.
Surface preparation - abrasive-jet device.
Consumption: 00.23 kg / m2 (&#948; = 40 &#956;m)

* ZINGALVANIC
material for cold galvanizing of steel (patent UA UA 14036 dated April 17, 2006, Ukraine) is made on the basis of a modified acrylic polymer binder, produced in Europe by tolling. The composition has several modifications: it contains not only spherical and oval zinc particles with a particle size of about 3 &#956;m (as in Zinga), but also zinc and / or zinc + aluminum (depending on the modification) particles in the form of flakes with the size of fraction 20 ... 25 &#956;m. This combination of metal particles in the polymer binder allows to obtain a microstructure of a coating similar to brickwork (similar to MIO structures), which makes it difficult for aggressive media to penetrate to the substrate to be protected.
ZinGalvanic is designed for galvanizing steel products, as well as for repairing and repairing damaged zinc coatings on steel.
Appearance of the coating is silvery, matte.
The surface of the galvanized ZinGalvanic product looks like a surface hot-dip galvanized.
Adhesion - 1 point.
Surface preparation - Sa 2,5 (ISO 12944) - abrasive blasting preparation, roughness Ra 12,5 mkm, dedusting, degreasing.
Consumption: 00.25 kg / m2 (&#948; = 40 &#956;m)


ZINC PRIMERS

* LIQUID ZINC
The material is a slurry of metallic zinc particles in a polymer binder based on polyurethane or acrylic-styrene copolymer and is intended for the anticorrosion priming of the surface of steel products before application of paint coatings. This material is similar to other DSPs, but with similar other parameters, the Liquid Zinc coating provides slightly higher protector protection values than others.
Appearance of the coating is gray, matt.
Adhesion - 1 point. The coating has a high adhesion to steel surfaces even without special preparation.
Surface preparation - St 2 (ISO 12944) - remove loose layers, dust off, degrease. Abrasive blasting is desirable, but not necessary.
Consumption: 00.21 kg / m2 (&#948; = 40 &#956;m)

* LIQUID ZINC ZC
Consumption: 00.12 kg / m2 (&#948; = 30 &#956;m)

* ZINGAMETALL PRIMER
Consumption: 00,18 kg / m2 (&#948; = 40 &#956;m)


SPECIAL MATERIALS

* AQUAZINGAMETALL
is characterized by high and long-term stability in highly corrosive atmospheric conditions, in a moist, chemical, salt medium.
It has excellent and extremely long-lasting stability with constant contact with ordinary, ionized, sea water (also under conditions of constant immersion in water), in contact with hydrocarbons, with organic solvents and some chemicals (pH 5.5 to 10.5).
Resistant to high temperatures (400 C) and often repeated temperature changes. And this in combination with ordinary and sea water, containing chemicals water, soda water.
Very well reacts to the effect of vapors, gasolines or their vapors.
Appearance of the coating is gray, matt.
Surface preparation - Sa 2 (ISO 12944).
Consumption: 00.11 kg / m2 (&#948; = 20 &#956;m)

* ZINGAMETALL ALU
is a slurry of highly active aluminum pigment in a solution of a polymer binder. Typically used in two-layer systems to apply a protective layer over ZinGalvanic or Liquid Zinc. Thus, double cathodic protection is provided, i.e., a more reliable protection against corrosion. The material can also be used alone for coating.
Appearance of the coating is silvery.
Adhesion - 1 point.
Surface preparation - Sa 2 (ISO 12944)
Consumption: 00.08 kg / m2 (&#948; = 20 &#956;m)

* U-5000
Consumption: 00.08 kg / m2 (&#948; = 20 &#956;m)

* THERMOCERAM.
Liquid-ceramic heat-insulating material
For buildings (facade or interior decoration), structures, pipelines.
Colors are the main seven.
Consumption: 01 l / m2; 0.08 kg / m2; (&#948; = 1000 &#956;m).
The thickness depends on the number of layers.

* ZINGAMETALL COLOR
Universal decorative coatings (glossy).
Are applied on metal, concrete, wood, ceramics, plastic.
The thickness depends on the number of layers

* ZINGAMETALL DECOR
Universal decorative coatings (matt).
Are applied on metal, concrete, wood, ceramics, plastic.
Consumption: 00.08 kg / m2; (&#948; = 40 &#956;m).


SOLVENTS

* ZINGAMETALL SOLV
branded oil solvent ZingaMetall
Appearance - clear, colorless
5 ... 10% by weight

* ZINGASOLV
Appearance - clear, colorless
5 ... 10% by weight

Prices for special materials ZingaMetallCeram, ZingaMetallLiquidPlast, Compound No1 for ZingaMetall, AquaZingaMetall, ZingaMetall WaterBase are requested by the customer in writing with the assignment of a technical assignment.


EQUIPMENT: THERMO-ABRASIVE EQUIPMENT
* TAU-100, Ukraine
* RAU Dragon Jet
* Color Spray 1, 220 V. Installation for airless application of metal polymers
* Color Spray 2, 380 V. Installation for airless application of metal polymers

The warranty for all equipment is 1 year.


--- WATERPROOFING AQUASTOP ---

* AQUASTOP - PENETRATING INTO CONCRETE
penetrating - for waterproofing concrete and reinforced concrete structures
Consumption: 0,8-1,2
kg-1m2
Container: 5kg / 15kg
Unit. amend. of the goods: 1kg

* AQUASTOP - REPAIR OF CONCRETE JOINTS
suture - to seal joints, joints, cracks and junctions.
Consumption: 1,5-1,9 kg-1m / p
Container: 5kg / 15kg
Unit. amend. of the goods: 1kg

* AQUASTOP - REINFORCING CONCRETE ADDITIVE
additive - waterproofing additive in concrete and mortar.
Consumption: 4 kg-1m3
Container: 5kg / 15kg
Unit. amend. of the goods: 1kg

* AQUASTOP - PLOMBA, LIQUIDATOR OF FLOW
seal - to eliminate holes and leaks.
Consumption: 1,5-1,9 kg-1m / p
Container: 5kg / 15kg
Unit. amend. of the goods: 1kg

* AQUASTOP - COATING TO IMPROVE WATERPROOFING -
coating - for high-quality waterproofing coating.
Consumption: 2-3 kg-1m2
Container: 5kg / 15kg
Unit. amend. of the goods: 1kg

* AQUASTOP - ELASTIC - ELASTIC
for an elastic waterproofing coating.
Consumption: 1,7-2 kg-1m2
Container: 8.6 kg 5 l
Unit. amend. Item: 1 set.

* HYDROPHOBICATOR AQUASTOP K -
Hydrophobic agent (concentrate 1:20) for the protection of bricks, plasters, aerated concrete
Consumption: 150-400 ml solution 1m2
Container: 0.25 / 1/5
Unit. amend. Item: 1 l

* HYDROPHOBICATOR AQUASTOP M - HYDROPHOBIC AGENT (LOOKING LIKE HUMIDITY)
for the protection of brick, plaster with the effect of wet stone.
Consumption: 150-300 ml / 1m2
Container: 0.85 / 1/5
Unit. amend. Item: 1 l

* HYDROPHOBICATOR AQUASTOP - HYDROPHOBIC AGENT -
The mortar is ready, to protect the brick, plaster
Consumption: 150-300 ml / 1m2
Unit. amend. Item: 1 l

* MODIFIER AQUASTOP - MODIFIER
concrete accelerator
Consumption: 5-6 l / 1m3
Container: 1L / 5L
Unit. amend. Item: 1 l

* PLASTICIZER FOR HEATING FLOOR PLASTICIZER FOR HEATING FLOOR
Plasticizer for floor heating.
Consumption: 4l-1m3
Container: 4l
Unit. amend. Item: 1 l

PLASTICIZER FOR REPLACEMENT OF LIME PLASTIFICATOR
Plasticizer in plaster or mortar.
Consumption: 2,5 l-1m3
Container: 5L
Unit. amend. Item: 1 l

ANTI-GRIBK SOLUTION OF AQUASTOP ANTIFUNGAL
for mineral bases
Consumption: 150-300 ml / 1m2
Container: 5L
Unit. amend. Item: 1 l

* AQUASTOP REPAIR STRUCTURE
Repair, to update the structure of concrete.
Container: 5kg / 15kg
Unit. amend. of the goods: 1 kg

* AQUASTOP WATERPROOF - HYDRAULIC INSTALLATION
Swelling hydrophilic rubber for making cold seams in concrete.
Consumption: 1m
Container: 1m
Unit. amend. Item: 1m

* WATERPROOFING
penetrating waterproofing with thermal insulation effect
Consumption: 0,8-1,2 l = 1 sq.m.
Container: 10 = 20 liters.
Unit. amend. goods: L.



And also we offer:
1. Galvanizing of metal structures in a cold way;
2. Thermal insulation of pipes, facades of buildings and structures, thermal insulation of industrial and private premises with the use of warm paint and warm plaster;
3. Penetrating waterproofing of concrete, facade, foundation, screeds, basements and reservoirs, as well as repair of previously damaged concrete.
4. Cleaning of metal structures from rust, old paint, rolling scale, etc. using a thermo-brazed installation of the TAU-100- DRAGON JET SET;
5. Decorative metallization of objects of black metal for gold, silver, bronze, copper, brass, etc .;
6. Painting of objects with anticorrosion and paint and varnish materials;
7. Development of anticorrosive, heat-insulating and waterproofing systems and according to the technical task of the customer.
Subsidiary
Office:
Kyiv, st. Red Army, 62-a
Tel. 067-507-76-60

Warehouse in Kiev:
ul. Korolenkovskaya, 4
(operator of the warehouse Ukravtoresurs)
Tel. (044) 246-73-06
Import
Quality Standards ISO
ISO 12944